Communication drivers

The communication drivers are designed for data transmission from hardware devices to the runtime software and command transmission from the runtime software to the devices in accordance with the device communication protocol. These drivers require a license. The price of the license differs based on the type of device for which the driver is designed. In addition, Reliance can communicate to any device for which an OPC or DDE server is available (Reliance is an OPC and DDE client).





Communication drivers supported by Reliance

Allen Bradley logo

Allen Bradley (under developement)
Allen Bradley Communication Driver is intended for data connection between Reliance's runtime software and Allen Bradley's Micrologix control systems communicating via the Ethernet/IP protocol.

AMiT logo

AMiT
AMiT Communication Driver is intended for data connection between Reliance's runtime software and control systems manufactured by the AMiT company.

BACnet logo

BACnet
BACnet Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via the BACnet/IP protocol.

CIMON logo

CIMON
CIMON Communication Driver is intended for data connection between Reliance's runtime software and CIMON control systems through the CIMON PLC Ethernet network.

DLMS logo

DLMS
DLMS Communication Driver (DLMS stands for Device Language Message Specification) is intended for reading data from telemetry systems communicating via this protocol.

DNP3 logo

DNP3
DNP3 Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via DNP3 (Distributed Network Protocol).

Elgas logo

ELGAS 2
Elgas Communication Driver is intended for data connection between Reliance's runtime software and ELGAS gas-volume conversion devices, dataloggers, and telemetry systems (ELCOR-2, DATCOM-2, DATCOM-AMR2).

Elgas logo

ELCOR-94
ELCOR-94 Communication Driver is intended for data connection between Reliance's runtime software and ELGAS' ELCOR-94 gas-volume conversion device.

External Communicator

External Communicator
This is a stand-alone program for sending and receiving data via a serial communication port. The program can be used for communication to devices with a simple communication protocol. It is useful in situations when neither a native communication driver nor OPC/ DDE servers are available for a device.

GE Fanuc logo

GE Fanuc (under developement)
GE Fanuc Communication Driver is intended for data connection between Reliance's runtime software and GE Fanuc control systems communicating via the SNP protocol.

Generic Driver

Generic Driver
Generic Driver is a communication driver available with Reliance SCADA. It is designed for data exchange between Reliance and devices for which a native driver or an OPC/DDE server is not available.

Hima logo

Hima
Hima Communication Driver is intended for data connection between Reliance's runtime software and safety control systems by HIMA Paul Hildebrandt.

IEC 104 logo

IEC 60870-5-104
IEC 60870-5-104 Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via the communication protocol according to the IEC 60870-5-104 standard.

IEC 62056-21

IEC 62056-21
IEC 62056-21 Communication Driver is intended for data connection between Reliance's runtime software and telemetry systems communicating via the communication protocol according to the IEC 62056-21 standard.

ZPA Nová Paka

INMAT 51 a 66
INMAT Communication Driver is intended for data connection between Reliance's runtime software and INMAT 51 or INMAT 66 meters by ZPA Nova Paka.

IoT logo

IoT
IoT Communication Driver (IoT stands for Internet of Things) allows implementing devices communicating via the LoRaWAN and Sigfox networks.

IoT logo

Johnson Controls
Johnson Controls Communication Driver is intended for data connection between Reliance's runtime software and Johnson Controls devices – 9100 series (DX9100, SC9100) and FX series (FX15, FX07).

KNX logo

KNX
KNX Communication Driver is intended for data connection between Reliance's runtime software and control systems connected via the KNX/IP network.

M-Bus logo

M-Bus
M-Bus Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via the M-Bus (Meter Bus) protocol.

Maatrix logo

Maatrix
Maatrix Communication Driver is intended for data connection between the Reliance SCADA system and the Maatrix emergency communication service.

Mitsubishi logo

Mitsubishi
Mitsubishi Communication Driver is intended for data connection between Reliance's runtime software and Mitsubishi control systems (series FX, A, Q, L) through Ethernet.

Modbus logo

Modbus
Modbus Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via the Modbus RTU and/or Modbus TCP communication protocols.

Schneider Electric logo

Modicon
Modicon Communication Driver is intended for data connection between Reliance's runtime software and Modicon logic controllers by Schneider Electric.

Motorola logo

Motorola
Motorola Communication Driver is intended for data connection between Reliance's runtime software and MOSCAD remote terminal units by Motorola Solutions.

MQTT logo

MQTT
MQTT (MQTT stands for Message Queuing Telemetry Transport) is an IoT-based driver, but the communication principle – from the point of view of Reliance – is different from that of IoT Communication Driver (IoT stands for Internet of Things).

Omni logo

Omni
Omni Communication Driver is intended for data connection between Reliance's runtime software and OMNI 3000 or OMNI 6000 flow meters by OMNI Flow Computers.

Omron logo

Omron (under developement)
Omron Communication Driver is intended for data connection between Reliance's runtime software and Omron control systems communicating via the Ethernet/IP protocol.

OPC UA logo

OPC UA Client
OPC UA Client is a communication driver intended for data connection between Reliance SCADA and systems/devices from third-party producers that meet the OPC UA communication standards.

ELSACO logo

PROMOS RT
PROMOS RT Communication Driver is intended for data connection between Reliance's runtime software and PROMOS RT or PROMOS PL2 control systems by ELSACO.

Rittmeyer logo

Rittmeyer WSR3000
Rittmeyer WSR3000 Communication Driver is intended for data connection between Reliance's runtime software and Rittmeyer WSR3000 devices connected via the WSK150 communication unit.

Sauter logo

Sauter EY2400
Sauter EY2400 Communication Driver is intended for data connection between Reliance's runtime software and Sauter EY2400 devices.

SIS Sevme logo

Sevbus
Sevbus Communication Driver is intended for data connection between Reliance's runtime software and TAIGA or ENVOL telemetry systems by SIS, which communicate via the Sevbus protocol.

Siemens logo

Siemens
Siemens Communication Driver is intended for data connection between Reliance's runtime software and Siemens control systems through Ethernet. They are SIMATIC S7-200, S7-300, S7-400, S7-1200, S7-1500, and LOGO!

SMS Driver logo

SMS Driver
SMS Driver is intended for sending/receiving short text messages (SMS) from/to Reliance's runtime software. Sending and receiving messages is provided by a GSM modem connected to the computer.

SNMP logo

SNMP
SNMP Communication Driver (SNMP stands for Simple Network Management Protocol) is intended for reading data from network elements. Today, most network management tools are based on this protocol.

Teco logo

Teco
Teco Communication Driver is intended for data connection between Reliance's runtime software and control systems by Teco (Tecomat, Tecoreg, Tecomax).

WAGO logo

WAGO
WAGO Communication Driver is intended for data connection between Reliance's runtime software and WAGO devices communicating via Modbus TCP/UDP.



Top