The communication drivers are designed for data transmission from hardware devices to the runtime software and command transmission from the runtime software to the devices in accordance with the device communication protocol. These drivers require a license. The price of the license differs based on the type of device for which the driver is designed. In addition, Reliance can communicate to any device for which an OPC or DDE server is available (Reliance is an OPC and DDE client).
Allen-Bradley Communication Driver is intended for data connection between Reliance's runtime software and Allen-Bradley's SLC, MicroLogix, 1761-NET-ENI, Micro800, CompactLogix, and ControlLogix control systems communicating via the Ethernet/IP protocol.
AMiT Communication Driver is intended for data connection between Reliance's runtime software and control systems manufactured by the AMiT company.
BACnet Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via the BACnet/IP protocol.
CIMON Communication Driver is intended for data connection between Reliance's runtime software and CIMON control systems through the CIMON PLC Ethernet network.
Danfoss Communication Driver is intended for data connection between the Reliance SCADA/HMI system and Danfoss control systems through the Danfoss SM (System Manager) communication gateway.
DLMS Communication Driver (DLMS stands for Device Language Message Specification) is intended for reading data from telemetry systems communicating via this protocol.
DNP3 Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via DNP3 (Distributed Network Protocol).
The communication driver is intended for data connection between Reliance's runtime modules and Domat control systems communicating via the SSCP protocol.
Elcor Communication Driver is intended for data connection between Reliance's runtime software and ELGAS' ELCOR-94 gas-volume conversion device.
Elgas Communication Driver is intended for data connection between Reliance's runtime software and ELGAS gas-volume conversion devices, dataloggers, and telemetry systems (ELCOR-2, DATCOM-2, DATCOM-AMR2).
GE Fanuc Communication Driver is intended for data connection between Reliance's runtime software and GE Fanuc control systems communicating via the SNP protocol.
Generic Driver is a communication driver available with Reliance SCADA. It is designed for data exchange between Reliance and devices for which a native driver or an OPC/DDE server is not available.
HIMA Communication Driver is intended for data connection between Reliance's runtime software and safety control systems by HIMA Paul Hildebrandt.
IEC 60870-5-104 Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via the communication protocol according to the IEC 60870-5-104 standard.
IEC 62056-21 Communication Driver is intended for data connection between Reliance's runtime software and telemetry systems communicating via the communication protocol according to the IEC 62056-21 standard.
INMAT Communication Driver is intended for data connection between Reliance's runtime software and INMAT 51 or INMAT 66 meters by ZPA Nova Paka.
IoT Communication Driver (IoT stands for Internet of Things) allows implementing devices communicating via the LoRaWAN and Sigfox networks.
Johnson Controls Communication Driver is intended for data connection between Reliance's runtime software and Johnson Controls devices – 9100 series (DX9100, SC9100) and FX series (FX15, FX07).
KNX Communication Driver is intended for data connection between Reliance's runtime software and control systems connected via the KNX/IP network.
Maatrix Communication Driver is intended for data connection between the Reliance SCADA system and the Maatrix emergency communication service.
M-Bus Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via the M-Bus (Meter Bus) protocol.
Mitsubishi Communication Driver is intended for data connection between Reliance's runtime software and Mitsubishi control systems (series FX, A, Q, L) through Ethernet.
Modbus Communication Driver is intended for data connection between Reliance's runtime software and devices communicating via the Modbus RTU and/or Modbus TCP communication protocols.
Modicon Communication Driver is intended for data connection between Reliance's runtime software and Modicon logic controllers by Schneider Electric.
Motorola Communication Driver is intended for data connection between Reliance's runtime software and MOSCAD remote terminal units by Motorola Solutions.
MQTT (MQTT stands for Message Queuing Telemetry Transport) is an IoT-based driver, but the communication principle – from the point of view of Reliance – is different from that of IoT Communication Driver (IoT stands for Internet of Things).
Omni Communication Driver is intended for data connection between Reliance's runtime software and OMNI 3000 or OMNI 6000 flow meters by OMNI Flow Computers.
OMRON Communication Driver is intended for data connection between Reliance's runtime software and OMRON's NX-series I/O system communicating via the Ethernet/IP protocol, and CJ and CS series communicating via the FINS/UDP protocol.
OPC UA Client is a communication driver intended for data connection between Reliance SCADA and systems/devices from third-party producers that meet the OPC UA communication standards.
Plum Communication Driver is intended for data connection between Reliance's runtime software and Plum telemetry systems (MacMAT, MacBAT, MacREJ) communicating via the GAZ-MODEM2 protocol.
PROMOS Communication Driver is intended for data connection between Reliance's runtime software and PROMOS RT or PROMOS PL2 control systems by ELSACO.
Rittmeyer WSR3000 Communication Driver is intended for data connection between Reliance's runtime software and Rittmeyer WSR3000 devices connected via the WSK150 communication unit.
Sauter EY2400 Communication Driver is intended for data connection between Reliance's runtime software and Sauter EY2400 devices.
Sevbus Communication Driver is intended for data connection between Reliance's runtime software and TAIGA or ENVOL telemetry systems by SIS, which communicate via the Sevbus protocol.
Siemens Communication Driver is intended for data connection between Reliance's runtime software and Siemens control systems through Ethernet. They are SIMATIC S7-200, S7-300, S7-400, S7-1200, S7-1500, and LOGO!
SMA Communication Driver is intended for data connection between Reliance's runtime software and Sunny devices communicating via the SMA protocol.
SMS Driver is intended for sending/receiving short text messages (SMS) from/to Reliance's runtime software. Sending and receiving messages is provided by a GSM modem connected to the computer.
SNMP Communication Driver (SNMP stands for Simple Network Management Protocol) is intended for reading data from network elements. Today, most network management tools are based on this protocol.
Teco Communication Driver is intended for data connection between Reliance's runtime software and control systems by Teco (Tecomat, Tecoreg, Tecomax).
TREND Communication Driver is intended for data connection between the Reliance SCADA/HMI system and TREND IQ22x control systems.
WAGO Communication Driver is intended for data connection between Reliance's runtime software and WAGO devices communicating via Modbus TCP/UDP.
If you have any questions, please feel free to email or call us.
Phone:
Info:
Sales:
Suppor:
Phone:
Info:
Sales:
Support:
Phone:
Info:
Sales:
Support:
GEOVAP
Cechovo nabrezi 1790
530 03 Pardubice
Czechia
© 2025 GEOVAP | Terms of Use and Privacy Policy | Cookie preferences | Write to Us