RSS Feed

How to interconnect the Reliance 4 system and the Mosaic development environment

If no real PLC is available, you can, in such a case, connect to the Simulated PLC in the Mosaic environment.


In the Reliance Design development environment, on the Basic page of the communication channel for a desired device in the Project Structure Manager, select the Network (Ethernet) channel type. If both Reliance and Mosaic run on the same computer, enter the following IP address: "127.0.0.1". If Mosaic runs on another computer, enter this computer's IP address.


Subsequently, in Mosaic's Project Manager, select the Simulated PLC connection type and check the Mosaic PLC option.


Question iconHaven't found what you were looking for? Use this form to inform us about it.

Support
Top